SERVICE LETTER #32

DATE:                    June 23, 1994

SUBJECT:              Elevator Push-Pull Tubes

APPLICABILITY:     All Series 5 Vixen Kitfox's

COMPLIANCE:       As required

FROM:                   SkyStar Aircraft Product Development Department

Some Series 5 Vixen kits shipped before this date have included an elevator push-pull tube that was cut incorrectly.  We have developed a retrofit kit P/N 10228.000 that corrects the situation.  Check the dimension given in your Builder's Manual, and if your elevator push-pull tube is shorter than that specified, a retrofit kit will be  sent to you free of charge.

Instructions and all necessary parts are included with the kit.  If you have any questions about this service letter or the kit itself, please call Customer Service at 208-454-1443.